The slider dimensions are: 14.5" in length, Bolt holes on each slider from center of hole to center of hole are 11". That would be great if you could draw it up in CAD. I'll weld two connecting pieces between the front and rear brackets and then bolt the seat sliders either to the front and rear brackets or to the connecting side pieces (depending on the slider bolt hole dimensions). I probably won't weld the sliders to the front and rear brackets. I have 1.25" x 1/4" flat bar in my shop which I'll use. What seats do you want to put in? If you give me the dimmensions of the seat sliders, I'll draw you up a diagram in CAD of the brackets you'll need to make.I see how you did it. If he doesn’t post in here, give Josh a PM. They just mounted to the rear inside mount on the floor. We also made L-shaped brackets that the seat belt receptacles would bolt too. On each end of course we drilled holes where they would bolt to the floor o the stock mounts and then just welded them to the seat slides. The rear we just used a un-bent flat piece. Then we bent it into a shape like _/-\_ only with the angles at 90º. When Josh and I made his, we used 1"x1/4" strap steel.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |